27
2)Use the UP/DOWN scroll button to select Stored Codes or Pending Codes
from the Trouble Codes menu and press ENTER.
• If there are no Diagnostic Trouble Codes present, the display indicates
“No (pending) codes are stored in the module!” Wait a few seconds or
press any key to return to the Diagnostic Menu.
3)View DTCs and their definitions on screen.
• The control module number, sequence of the DTCs, total number of
codes detected and type of codes (Generic or Manufacturer specific)
will be observed on the upper right hand corner of the display.
4)If more than one DTC is found, use the UP/DOWN scroll button, as necessary,
until all the codes have been viewed.
• If retrieved DTCs contain any manufacturer specific or enhanced codes,
a “Manufacturer specific codes are found! Press any key to select
vehicle make!” message comes up prompting you to select vehicle
manufacturer to view DTC definitions. Use the UP/DOWN scroll button
to select manufacturer and then press ENTER to confirm.
Trouble Codes
1/2
? Stored Codes
Pending Codes ?
$09 1/5
P0118
Generic
Engine Coolant Temperature
Sensor 1 Circuit High
Vehicle Manufacture
1/51
? Alfa Romeo
Audi/VW
BMW ?
Buick
Cadillac
Chevrolet
