14
2)From the DTC Lookup menu, use the LEFT/RIGHT button to move to the
desired character, use the UP/DOWN button to change the selected digit/
character and press the ENTER button to confirm.
3)View the DTC definition on screen. When the DTC definition covers more than
one screen, use the LEFT/RIGHT button to view additional information on
previous/next screen(s).
• For manufacturer specific codes, you’ll need to select a vehicle make
on an additional screen to look for DTC definitions.
• If definition could not be found (SAE or Manufacturer Specific), the scan
tool displays “DTC definition not found! Please refer to vehicle service
manual!”
4)To view next or previous DTC in the DTC library, use the UP/DOWN button.
5)To enter another DTC, press the ESC button to return to the previous screen.
6)To exit to the Main Menu, press the ESC button.
3.8 Product Setup
The scan tool allows you to make the following adjustments and settings:
1)Language: Selects the desired language.
2)Contrast adjustment: Adjusts the contrast of the LCD display.
3)Unit of measure: Sets the unit of measure to English or Metric.
4)Auto Power-Off: Sets automatic power-off limits.
5)Beep Set: Turns on/off beep.
6)Tool self-test: Checks if the LCD display and keyboard are working normally.
• Settings of the unit will remain until changes to the existing settings are made.
To enter the setup menu mode
From the keyboard: Press the ESC button to enter the System Setup
menu. Follow the instructions to make adjustments and program settings
as described in the following setup options.
DTC Lookup
P 0 0 0 1
[ ] – Left [ ] - Right
［ ］［ ］- Change Digit
［ENTER］- Confirm
［ESC］- Exit
