Tascam DR-22WL MP3 Player User Manual


 
TASCAM DR-22WL
43
13 – Specifications
Rating
8
Recording media
microSD card (64 MB−2 GB)
microSDHC card (4 GB−32 GB)
microSDXC card (48 GB−128 GB)
8
Recording/playback formats
BWF: 44.1k/48k/96kHz, 16/24 bit
WAV: 44.1k/48k/96kHz, 16/24 bit
MP3: 44.1k/48 kHz, 32k/64k/96k/128k/192k/256k/320kbps
8
Number of channels
2 channels (stereo)
Input/output ratings
Analog audio input and output ratings
8
MIC/EXT IN jack (can provide plug-in power)
Connector: 1/8” (3.5 mm) stereo mini jack
Input impedance: 25 kΩ
Reference input level: −20dBV
Maximum input level: −4dBV
8
/LINE OUT jack
Connector: 1/8” (3.5 mm) stereo mini jack
Output impedance: 12 Ω
Reference output level: −14dBV (with 10kΩ load)
Maximum output level: +2dBV (with 10kΩ load)
Maximum output: 20mW+20mW (with 32Ω load)
8
Built-in speaker
0.3W (mono)
Control input/output ratings
8
USB port
Connector: Micro-B type
Format: USB 2.0 HIGH SPEED mass storage class
Audio performance
8
Frequency response
20-20 kHz +1/-3 dB (EXT IN to LINE OUT, Fs44.1 kHz, JEITA)
20-22kHz +1/-3 dB (EXT IN to LINE OUT, Fs48kHz, JEITA)
20-40kHz +1/-3 dB (EXT IN to LINE OUT, Fs96kHz, JEITA)
8
Distortion
0.05% or less (EXT IN to LINE OUT, Fs44.1k/48k/96kHz, JEITA)
8
S/N ratio
92dB or above (EXT IN to LINE OUT, Fs44.1k/48k/96kHz,
JEITA)
Note) Based on JEITA: JEITA CP-2150
Requirements for connected
computers
Please visit the TEAC Global Site (http://teac-global.com) to
learn the latest compatible OS.
8
Windows
Pentium 300MHz or more
128MB or more memory
USB port (USB2.0 is recommended)
8
Mac
Power PC, iMac, G3, or G4 with 266MHz or above
64MB or more memory
USB port (USB2.0 is recommended)
8
Recommended USB host controller
Intel chip set
8
Supported operating systems
Windows: Windows XP, Windows Vista, Windows 7,
Windows 8 (including 8.1)
Macintosh: Mac OS X 10.2 or later
Wi-Fi
8
Wireless standard
Based on IEEE 802.11b/g/n (2.4GHz only)
8
Wireless communication mode
Simple access point (Limited AP)
8
Security
WPA2-PSK (WPS2.0 compatible)