Filter
Top Products
PAGE
5
MAXTOR SHARED STORAGE II
WINDOWS INSTALLATION
Step 3 – Set up the Drive
1. Insert the Maxtor Shared Storage II Installation Software
into your CD-ROM drive. The Select Language window will
display.
Note:
In the event that the CD does not autorun, click
Start
➔
Run
. Browse to the drive letter associated with
the EasyManage CD. Click on
Setup
, click
Open
,
and then
click
OK
.
2. The
Select Language
window opens. Choose your
language
(e.g., English).
3. From the main menu, click
Install Software
.
4. You will be asked if you wish to install the software.
Click
OK
.
5. The
License Agreement
screen will appear. Click
Yes
.
6. The
Choose Destination Location
screen will appear. If
you wish to change the location of the installation, you
may do so by clicking the Browse button and selecting a
new location. Click
Next
.
7. The
Setup Status
screen will appear as the software is
installed, followed by the
InstallShield Wizard Complete
screen when the installation is complete. Click
Finish
to
restart your system.
8. After system restart, EasyManage will discover Shared
Storage Drive(s) on you network segment.
Note:
In the event that No Shared Storage Drives were
found, please refer to the Help File for available
troubleshooting tips.
A Note About EasyManage
EasyManage is an all encompassing application that will,
under specific conditions, allow you to manage both Maxtor
OneTouch III and Shared Storage Drive products through one
single interface.
This simply means that you can use EasyManage in
conjunction with these products provided one of the following
software packages is installed:
– Maxtor OneTouch III USB 2.0
– Maxtor OneTouch III FireWire 400/USB 2.0
– Maxtor OneTouch III FireWire 800/FireWire 400/USB 2.0
– Maxtor OneTouch III Turbo Edition
– Maxtor OneTouch III Mini Edition
Granted, you can use these software packages completely
separate from EasyManage. However, it is suggested that you
use the EasyManage application with all of these products.
Note:
Please refer to Maxtor’s Knowledge Base for
examples and more information.
9. Once detected, a window displays informing you that your
Shared Storage drive has no security password set for the
administrative function.
To set a password for the drive, click
Manage
. This will
launch the Web User Interface (Web UI). Follow the
onscreen prompts in you browser to configure your
Shared Storage Drive.
Note:
See “The Web UI” later in this guide for details on
using the Maxtor Shared Storage Web UI. Run Set-up
Wizard for more information on configuring these
settings.
10. When finished, close your browser to return to the
Storage Manager’s Settings screen, and then click the
Home
button.