Filter
Top Products
PAGE 48
MAXTOR SHARED STORAGE II WEB USER INTERFACE
Configure Your USB Devices
Use these pages to configure USB drives and to manage
USB printers plugged into the Shared Storage Drive.
Format USB Drive
1. Click Format USB Drive.
2. Select the button indicating if you would like to:
– Re-format the drive and create a single partition
– Re-format a specific existing partition
3. If necessary, select the partition you wish to format and
click Next.
4. Enter a Volume name and click Next.
5. A warning will appear stating that if you continue, you will
lose all of your data. Click Next.
6. You will then see a status page with an elapsed time on it.
When the drive has finished formatting, you will see a
message that the USB drive has been successfully
formatted. Click Done to return to the Configure Your
USB Devices page.
Printer Support Management
1. Click Printer Support Management.
2. You will see the current status of your printer support. It
will be Enabled or Disabled. Depending on the state, the
button on the screen will read to opposite. If the printer
support is disabled and you want to enable it, click Enable.
3. You will see a message stating that the Printer Support is
enabled. Click Done to return to the Configure Your USB
Devices page.
4. If Printer Support is enabled and you want to disable it,
click Disable. You will see a message stating that the
Printer Support is disabled.
5. Click Done to return to the Configure Your USB Devices
page.
Unplug USB Devices from the Shared Storage Drive
1. Click Unplug USB devices from the Shared Storage
Drive. It will list all of the USB devices currently plugged
into the drive.
2. Click the Safely Remove button next to the device that you
would like to unplug.
3. A message will appear stating that you can remove the
selected device. Click Done to return to the Configure
Your USB Devices page.