Filter
Top Products
7, Press MULTI JOG knob (ENTER on the remote
control) to confirm the beginning point of the partial
erase.
The passage helween the temporary ending point of Ihe partial
erase (the point that is l0 seconds after the begioning point)
and the point that is 5 seconds after the temporary ending point
is repeatedly played.
Endingpoint ofthe partial erase
D li"i "' u"_u"_u"_I ]
k,= :,,' ,=:_, u:,,=' u:,,= u:,,=
Playingtime ofthe track
Press CLEAR to cancel the confirmed selection.
8, Rotate the MULTI JOG knob (press +/- on the remote
control) to select the ending point of the partial
erase.
The ending point of the partial erase can be set by "minute:
second: frame". The unit to be set is flashing. Move the flash to
the unit to be set by pressing K< 1<< or _>/_ (_< or D,_
on the remole control).
If you stop rotating the MULTI JOG knob, this unit searches
for the ending point according to the setting made, and starts
repeated playback of the passage between the ending point and
the point that is 5 seconds after the ending point.
9. Press MULTI JOG knob (ENTER on the remote
control) to confirm the ending point of the partial
erase.
The passage helween the point that is 5 seconds hefore the
beginning point and the point that is 5 seconds alter the ending
point of the partial erase is repeatedly played.
The felh)wing message appears on the display.
M!Ii..........................
=,,,, =,,,, ,=, =,,, =,,,, .......
i i u,,, == k,, i == u:,,='u:,,= , [
t!
iiiili ::
=,,,, = =,,,, ]
=,,,, ,=, =,,,
i u,,, == i :':
,,,,. ,,,,, ,,,
="=' ="= i"=
=:,,=' =:,,=
::1,1| III_[ell II;_,__=.][_
To change the ending point, press CLEAR once to return to
step 8.
To change the beginning point press CLEAR twice to return to
step 6.
1 O, Press COMPLETE.
The selected part is erased.
This unit returns to the editing menu item selection. (lf the edit
menu is carried on during playback, playback restarts.)
m
• The sound may be interrupted at the joint but it will be played
properly aller the partial erase is completed.
• The minimum length of a track is lout seconds. It is not
possible to create a track shorter than lout seconds by erasing
partially.
Track
i Repeated passage when setting the beginning point
Repeated passage when setting the ending point
Repeated passage after confirming the ending point