Filter
Top Products
POWER
Press POWER on the front panel.
When the unit turns (m, the message "WELCOME TO YAMAHA
HDD/CD SYSTEM" appears on the front panel display then the
unit becomes ready to be operated.
For inlormation on specifications such as power consumption, refer
to "SPECIFICATIONS" (P.83).
• Do not turn off the unit during playback or recording. Doing so
may damage the HDD or data.
• If the message "Wait" appears in the display li}r20 seconds or
more alter turning on the unit, the HDD may not be installed
properly. Reli:r to the "HDD Installation Manual" and check the
connection.
This unit equips the HDD and CDR drive. When operating Ihe unit, you need to select HDD or CDR drive in accordance with your purpose.
HDD CDR
To operate the HDD drive, press HDD.
The HDD mark lights in the display, and the disc information
appears.
To operate the CDR drive, press CDR.
The unit starts to read the inl_wmation of a disc set in the disc tra_.
When the disc inliwmation is read completely, the CDR mark lights
in the display, and the disc inli}rmation appears.
When no disc is set in the disc tray, the message "No Disc" appears.
If you set a disc in the disc tray the unit automatically switches to
the CDR drive operation mode.
-HDD
-CDR
14