Filter
Top Products
Setting a condition for synchronized
recording
This unit automatically detects track intervals when recording is
made in track-synchronized recording mode, multi-synchronized
recording mode, or all-synchronized recording mode. You can set
the condition for detecting track intervals. Setting items are as
follows.
MULTIJOG MENU
-MENU
ENTER
1 • Press MENU while this unit is in the stop mode.
Menu item selection appears on the display.
2. Rotate the MULTI JOG knob (press +/-, • or • on the
remote control) to select "Synchro Setup".
_-1 = -1=1=,=== =1 1=-- =,=a=,-
3. Press the MULTI JOG knob (ENTER on the remote
control).
Setting item selection appears on the display.
4, Rotate the MULTI JOG knob (press +/-, • or • on the
remote control) to select a setting item.
OPT TH Level
Sets the signal level Ilaaljudges the signals input through the
DIGITAL IN (OPTICAL)jack as "no signal".
Initial setting: 5()dB, Control range: 90 to 20dB
COAX TH Level
Sets the signal level that judges the signals input through the
DIGITAL IN (COAXIAL)jack as "no signal".
Initial setting: 5()dB, Control range: 90 to 20dB
ANLG TH Level
Sets the signal level that judges the signals input through the
ANALOG LINE IN (REC)jacks as "no signal".
Initial setting: _,()dB, Control range: 60 Io 20dB
Int.Time
Sets the lengfll of silence ("no signal") that judges track intervals.
When the set am(mot of silence continues, Ihis unit judges it as a
Irack interval and places a Irack marker.
Initial setting: 2.0 seconds, Control range: 1).5to 5.0 seconds
End Duration
Sets the length of silence I"no signal") thor judges the end ol
playback when recording in the all-synchronized recording mode.
When the set amount of silence continues, recording will be
slopped.
Inilial setting: 12.0 seconds, Control range: 2.0 to 60.0 seconds
• If you sel a TH (threshold) level, a signal less Ihan Ihe specified
TH level is not inpul through the jack (considered as "no signal").
• Settings for "Int. Time" and "End Duration" apply to each input
jack.
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the setting item.
If "OPT TH Level", "COAX TH Level" or "ANLG TH Level"
is confirmed, lk_llowthe "When OPT TH Level. COAX TH
Level, or ANLG TH Level is selected" procedure below.
If "Ird. Time" or "End Duration" is confirmed, follow the
"When Int. Time or End Duration is selecled" procedure below.
(When OPT TH Level, COAX TH Level, or ANLG TH Level
is selected)
6. Rotate the MULTI JOG knob (press +/-, • or • on the
remote control) to adjust the level.
Level can he set hy ldB step.
Example: To set "ANLG TH Level"
.....'......... ......4 u'::_..dD
="= = '1 = = = = = = "I' =:.,1=.,.I i,.,= LEVEL
7. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the level.
Selling item selection appears on the display.
(When Int. Time or End Duration is selected)
6. Rotate the MULTI JOG knob (+/-, • or • on the
remote control) to set an interval.
"Int. Time" can he set hy 0.5-second steps, and "End Duration"
can be sel by, 1.0-second steps.
Example: To set "lnt.Time"
_....... 2 -; ; = = 1'1 =.... l= 1' = ':::, m''l m,
7. Press the MULTI JOG knob (ENTER on the remote
control) to set an interval.
Setting item selection appears on the displa>.
Press MENU twice to close the menu and return to the normal stop
mode.
36