Filter
Top Products
MY BOOK LIVE
USER MANUAL
TROUBLESHOOTING – 128
If the LED is solid green (indicating the drive is idle) or blue (indicating the drive is on
standby), the drive is ready to shut down.
1. Disconnect the Ethernet cable.
2. Unplug the power cable.
If the LED is white, the firmware is being updated. DO NOT UNPLUG THE POWER
as this could corrupt the firmware in the drive and cause data loss.
If the LED is any other color, wait for it to turn green. If it does not turn green, please
consult “Checking the Front Panel LED” on page 12.
How do I upgrade from My Book Live 3.0 firmware to My Book Live 3.5
firmware?
For instructions, search the Knowledge Base at http://support.wdc.com for
Knowledge Base Answer 6742.