Filter
Top Products
65
Additional Information
Error Messages
IC Recorder
“MEMORY STICK ERROR“
Insert the “Memory Stick“ again. After
inserting, if this message is displayed
again, the inserted “Memory Stick“ may be
out of order.
“NO MEMORY STICK“
Insert the “Memory Stick“ again if already
inserted.
“UNKNOWN DATA“
The unit cannot play or erase the selected
message because the file type is different.
“ACCESS ERROR“
After checking the write-protect switch,
insert the “Memory Stick“ again. If this is
displayed again, the inserted “Memory
Stick“ needs to be formatted (page 35).
Back up the data in the computer after
checking the contents.
“MEMORY STICK LOCKED“
The write-protect switch on the inserted
Memory Stick is set to “LOCK“ (page 11).
You cannot record, edit or format in this
condition. Slide the switch to the left and
insert again.
“FILE PROTECT“
Messages have been set to “Read-only“ in
the computer. You cannot edit or erase
messages and folders including these
“Read-only“ messages.
Remove the check for “Read-only“ under
“Properties“ of files that are opened by
Windows Explorer.
“FOLDER PROTECT“
Folders have been set to “Read-only“ in the
computer. You cannot edit, erase, add
messages, or move messages in these
“Read-only“ folders.
Remove the check for “Read-only“ under
“Properties“ of folders that are opened by
Windows Explorer.
“LOW BATTERY“
Batteries are weak. Replace batteries with
new ones.
“INDEX FULL“
Because there are over 999 messages in the
folders or the remaining memory of the
Memory Stick is short, it is impossible to
add an index. Erase some messages before
adding.
“FOLDER FULL“
Because the remaining memory of the
“Memory Stick“ is short, it is impossible to
add a folder. Erase some folders or
messages before adding.
“INDEX ERASE PROHIBITED“
You cannot erase an index to combine
messages of different recording modes.
“FOLDER ERASE PROHIBITED“
You cannot delete the last folder left in a
“Memory Stick“.
“ALREADY SET“
You set the alarm to play back a message at
a date and time previously set on another
message. Change the alarm date and time
or the previously set date and time.
“BACK DATE“
You set the alarm when the time is already
past. Check it and set the appropriate date
and time again.
“NO MEMORY SPACE“
There is no space to record in the inserted
“Memory Stick“. Erase recorded messages
or insert another “Memory Stick“.
If there are other formatted data in the
“Memory Stick“, delete them on the unit
used to record them.
“NO MESSAGE“
There is no recorded message in the folder.
You cannot make alarm setting, etc.,
because of this.
“PLEASE SET DATE & TIME“
If you do not set date and time, you cannot
set the alarm. To set date and time, see
page 10.
Continued