Filter
Top Products
40
2 Insert the supplied CD-ROM into
the CD-ROM drive.
After inserting, the installer starts up
automatically and the following window
appears.
If the installer does not start up, double
click [setup.exe] in the [Disk1] folder.
3 1 Click [Next].
The [Choose Destination Location]
dialog box appears.
2 Select the directory where the
“Memory Stick Voice Editor“ Software
is to be installed and click [Next].
If you want to select the default
directory, just click [Next].
The [Select Program folder] dialog box
appears.
3 Click [Next].
The [About This System] dialog box
appears.
4 Click [Next].
The installation of the software starts.
When the installation is finished, the
following window appears.
4 Click [OK].
The computer restarts. After the restart,
the installation is completed.
Installing the
Software
System Requirements
Your computer and system software must
meet the following minimum requirements.
•IBM PC/AT or compatible (You cannot use
this software with Macintosh)
— CPU: 200MHz Pentium
R
processor or higher
— RAM: 32MB or more (64 MB or more
recommended)
— Hard disk space: 70MB or more depending
on the size and number of sound files you
store.
— CD-ROM drive
— Sound board: Sound Blaster 16 compatible
— Display: High color (16 bit) or more and 800
x 480 dots or more
•OS: Microsoft Windows 98 or Windows 95 (You
cannot use this software with Windows NT)
Note
You need a computer with a “Memory Stick“ slot or
optional “Memory Stick“ adaptors as shown below
to use this software.
•PC Card Adaptor for Memory Stick (MSAC-PC1,
MSAC-PC2)
•PC card/Parallel Port Adaptor (MSAC-PR1) and
PC Card Adaptor for Memory Stick (MSAC-PC1,
MSAC-PC2)
• Floppy Disk Adaptor for Memory Stick
(MSAC-FD1)
Depending on the adaptors, more system requirements
may be needed.
To install the software
Install “Memory Stick Voice Editor“ Software
in your computer’s hard disk, etc.
Note
After installing, the following modules are also
installed depending the operation system of your
computer.
• Microsoft DirectX MediaRuntime
• Microsoft DCOM95 for Windows95
These modules are not deleted after uninstalling the
software.
1 Turn on your computer and start up
Windows.
Note
Be sure to close all running programs before
installing the “Memory Stick Voice Editor“
Software.