Filter
Top Products
12
2 Start recording.
Note on recording
Noise may be recorded if an object, such as
your finger, etc., accidentally rubs or
scratches the unit during recording.
3 Stop recording.
If you do not change the folder after you stop
recording, the next time you record you will
record in the same folder.
Note
While the OPR indicator flashes or lights in orange
or red, do not remove the “Memory Stick“, batteries,
or the AC adaptor.
Basic Operations
11
11
1Press the FOLDER
button
repeatedly to
display the folder
in which you
want to record a
voice message.
22
22
2Press the FOLDER
button again for
more than one
second to select.
To add a new
folder, see page 24.
OPR indicator
(lights in red during
recording)
11
11
1Press
zz
zz
zREC/STOP
button.
You do not need to
keep pressing the
zREC/STOP button
while recording.
Remaining memory
indication
Folder name (page 27)
STOP button
Press the
zz
zz
zREC/
STOP button again.
The unit stops at the
beginning of the
current recording.
SP
FOLDER O1
* The display selected
with the DISPLAY
button (page 34)
appears.
0
H
02
M
43
S
SP
R
ECORDI G N
22
22
2Speak into the
built-in
microphone.
Recording mode
indication
Counter display*
Current message
number
* You can select
folders using the
jog lever after
pressing the
FOLDER button.
Recording Messages
You can record up to 63 (SP mode)/131 (LP
mode) minutes, up to 965 messsages, using
the supplied Memory Stick (16MB) *.
Recorded messages are saved in folders.
You can make folders (3 folders already made
as a default setting).
* When using the supplied “Memory Stick“ for use
with ICD-MS1, three folders are set as the default
setting. The maximum recording time and the
number of messages you can make varies
depending on the conditions or capacity of the
“Memory Stick“. For more information, see page
64.
* SP mode is set as the default setting. The
maximum recording time ranges from 63 minutes
to 131 minutes when messages are saved in both
SP and LP modes.
Note
Before making a long recording, be sure to insert new
batteries and check the battery indicator (page 9).
You can also use the optional AC adaptor by
connecting it to the DC IN 3V jack instead of using
batteries. For more information, see page 9.
1 Select the folder *.