Filter
Top Products
16
If the last message is long and you wish to start
playback at a later part of the message, keep
pressing the jog lever down to play back the
message to the end and then press the jog lever up
while “MSG. END” is flashing to go back to the
desired point .
(For messages other than the last one, go to the
beginning of the next message and play backward to
the desired point.)
Playing the beginning of each
message
— Scanning Play
See page 19.
Playing back all messages in a
folder continuously
— Continuous Play
See page 37.
Searching forward/backward
during playback (Cue/Review)
• To search forward
Keep pressing the jog lever down during
playback and release it at the point you
wish to resume playback.
• To search backward
Keep pressing the jog lever up during
playback and release it at the point you
wish to resume playback.
The unit searches at slow speed (unit of 4
seconds) with playback sound. It is useful to check
one word forward or behind.
Then, if you keep pressing the jog lever up or
down, the unit starts to search at higher speed.
During cue/review, the counter will be displayed,
regardless of the display mode setting (page 34).
You can cue/review during playback pause.
Press the jog lever up or down and release it at the
point you want to resume playback pause.
Playing Back Messages (continued)
Other operations
To stop playback
To Do this
stop at the Press STOP.
beginning of the
current message
stop at the current Press the jog lever.
position To resume playback
(Playback Pause from that point,
function)* press the jog lever
again.
* You can also pause playback by pressing X(pause)
instead of the jog lever. The OPR indicator will flash
in green. After about one hour, the unit goes into
the stop mode at the current position.
To select the desired message
To Do this
go back to the Press the jog lever up
beginning of the once and release it.
current message
go back to previous Press the jog lever
messages up several times and
release it.
skip to the next Press the jog lever
message down once and
release it.
skip to the succeeding Press the jog lever
messages down several times
and release it.
1 Tip
When playback is done to the end of the last
message, “MSG. END” flashes for 3 seconds and
the OPR indicator lights up in green. (You cannot
hear the playback sound.) If you keep pressing the
jog lever up while “MSG. END” is flashing, the
messages will be played back rapidly, and normal
playback will start at the point you release the jog
lever.
When “MSG. END” stops flashing and the OPR
indicator goes off, the unit will stop at the beginning
of the last message.