Filter
Top Products
69
Specifications
CD Player section
Signal-to-noise ratio 90 dB
Frequency response 10 – 20,000 Hz
“MG Memory Stick” section
Signal-to-noise ratio 90 dB
Frequency response 10 – 20,000 Hz
Recording time (when using the 64MB “MagicGate
Memory Stick”)
Approx. 60 min. (132kbps)
Approx. 80 min. (105kbps)
Recording format Adaptive Transform
Acoustic Coding 3
(ATRAC3)
HDD section
Capacity 10 GB
Recording format Adaptive Transform
Acoustic Coding 3
(ATRAC3)
Frequency response 10 to 20,000 Hz
(single signal measurement)
Tuner section
FM
Tuning range 87.5 – 107.9 MHz
Antenna terminal External antenna connector
Intermediate frequency 10.7 MHz/450 kHz
Usable sensitivity 8 dBf
Selectivity 75 dB at 400 kHz
Signal-to-noise ratio 66 dB (stereo),
72 dB (mono)
Harmonic distortion at 1 kHz
0.6 % (stereo),
0.3 % (mono)
Separation 35 dB at 1 kHz
Frequency response 30 – 15,000 Hz
AM
Tuning range 530 – 1,710 kHz
Antenna terminal External antenna connector
Intermediate frequency 10.7 MHz/450 kHz
Sensitivity 30 µV
Power amplifier section
Outputs Speaker outputs
(sure seal connectors)
Speaker impedance 4 – 8 ohms
Maximum power output 45 W × 4 (at 4 ohms)
General
Outputs Audio outputs (front/rear)
Subwoofer output (mono)
Power antenna relay control
terminal
Power amplifier control
terminal
Inputs Telephone ATT control
terminal
Illumination control
terminal
AUX IN terminal
Antenna input terminal
Tone controls Bass ±8 dB at 100 Hz
Treble ±8 dB at 10 kHz
Loudness +8 dB at 100 Hz
+2 dB at 10 kHz
Power requirements 12 V DC car battery
(negative ground)
Dimensions
Approx. 178
×
50
×
182 mm
(7
1
/8 × 2 × 7
1
/4 in.)
(w/h/d)
Mounting dimensions
Approx. 182
×
53
×
161 mm
(7
1
/4 × 2
1
/8 × 6
3
/8 in.)
(w/h/d)
Mass Approx. 2.0 kg
(4 lb. 7 oz.)
Supplied accessories Parts for installation and
connections (1 set)
Front panel case (1)
Cleaning cloth (1)
Digital I/O cable (1)
CDDB Install CD-ROM (1)
Optional accessories Wireless rotary commander
RM-X6S
XM tuner
DRN-XM01C, RK-G129
(mini-jack to RCA cable),
DRN-XM01R
Note
This unit cannot be connected to a digital preamplifier
or an equalizer.
Design and specifications are subject to change
without notice.
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
23 watts per channel minimum continuous average power into 4 ohms,
4 channels driven from 20 Hz to 20 kHz with no more than 5% total
harmonic distortion.
AUDIO POWER SPECIFICATIONS