Filter
Top Products
43
Notes
• The Check-Out count is displayed as follows:
(3 times or more), (twice or more), (once),
no display (zero)
• Check-Out cannot be carried out if a Network
Walkman is full or the number of Checked-Out tracks
in a Network Walkman has reached the limit.
• Only the tracks that can be Checked-Out are
displayed in the list in step 5.
• The following tracks cannot be Checked-Out:
– A track whose allowable check-out count is 0 (zero)
– A track whose allowable playback period has expired
– A track with a playback period limit when the clock
on the unit has not been set
• A track recorded from a CD can be Checked-Out up
to 3 times.
• Do not disconnect the digital I/O cable while the LED
is on or flashing. The data being transferred may be
damaged.
Returning a track to the HDD
from a Network Walkman
— Check-In
Returning Checked-Out music data in a Network
Walkman to the HDD.
1 Display the source list (page 16).
2 Rotate the R dial to select “Digital I/O,”
then press the R dial.
3 Press (MENU).
The menu display appears.
4 Rotate the R dial to select “Check In,”
then press the R dial.
5 Rotate the R dial to select the track
you want to Check-In, then press the R
dial.
The selected item is displayed marked with
“.”
In the default setting, all tracks are selected in
the track name list.
To select specific tracks, press (F2) (ALL) to
cancel the selection first.
To cancel the item being selected, press the R
dial again.
6 Repeat step 5 to select all tracks you
want to Check-In.
7 Press (F1) (START).
Check-in starts.
The normal display appears when Check-In is
completed.
To cancel Check-In
Press (F1) (CANCEL).
Notes
• Only the tracks that can be Checked-in are displayed
in the list.
• A track that has been Checked-Out from other
devices cannot be Checked-In.
MENUF1
F2
R dial