Filter
Top Products
10
Basic operations
Listening to a track on a CD
1 Press .
The front panel slides down and the disc tray
slides out automatically.
2 Place a CD (labeled side up).
Set the CD on the disc tray until it clicks.
3 Push the disc tray.
Playback starts automatically.
Notes
• Do not put any foreign objects between the front
panel and the unit. The front panel cannot close and
possible damage may occur to the unit.
• Do not place more than 1 disc on the disc tray.
• The disc tray and front panel closes automatically
after the caution alarm beeps.
To adjust the volume level
Rotate the L dial.
To switch the display items
Press (DSPL).
To stop playback
Press (OFF).
When a CD is already inserted
Press (SOURCE) repeatedly to select “CD,” and
playback starts automatically.
To play back a CD automatically
Set “CD Auto Play” (page 20) to “On.”
The unit automatically plays back a CD when the
disc tray is closed.
To locate a specific point in a track
— Manual searching
Press (FUNCTION) repeatedly to display the
function menu “m” and “M.”
(F1) (m) : To search backward
(F2) (M) : To search forward
Press and hold (F1) or (F2).
Release when you have found the desired point.
To locate a specific track
— Automatic Music Sensor (AMS)
Rotate the R dial.
3
1
2
CD
L: To locate a preceding track
or the beginning point of the
current track
R: To locate a succeeding track
L
R