Filter
Top Products
27
2Rotate the dial to select the desired
character, then press the R dial.
The entries proposed appear.
To change the character types, rotate the R
dial to select “ ,” then press the R dial.
Each time you press (DSPL) , the alphabet
letter string displayed changes the type of
letters as follows:
All capital letters t the first letter in
capitals t all small letters
3Rotate the L dial to select the
desired entry proposed, then press
the L dial.
When there is no entry proposed, follow
steps 1 and 2 to finish entering the
name.
To move the cursor, rotate the R dial to
select “<” or “,,” then press the R dial.
To delete the entered character, rotate the
R dial to select “CLR,” then press the R
dial.
6 Rotate the R dial to select “OK,” then
press the R dial.
The normal display appears.
To cancel labeling the station
Rotate the R dial to select “NG” in step 6, then
press the R dial.
Tips
• Simply overwrite or enter “
_” to correct or erase a name.
• If no memory is remaining, “MEMORY FULL”
appears in the display, and you cannot assign a
station name.
Locating a station by name
— List-up
You can locate a radio station by its assigned
name. For details on how to name a station, see
page 26.
1 During radio reception, press the R
dial.
The frequencies or names assigned to the
stations appear.
2 Rotate the R dial to select the desired
station, then press the R dial.
The normal reception display appears.
Tip
“ B” is displayed to the left of the station name being
received.
R dial