Filter
Top Products
12
Recording audio CDs onto the HDD
1 Press (SOURCE) repeatedly to select
“CD.”
Note
If no CD is inserted, you cannot select “CD” as the
source.
2 Press .
The record setting display appears.
3 Adjust settings for recording.
1Press (F1) repeatedly to select the
recording bit rate, “132K” or “105K.”
2Press (F2) repeatedly to select the
recording speed, “HI-REC” or
“×1-REC.”
4 Press .
Recording starts.
CD playback starts automatically when all
tracks are recorded.
To stop recording
Press (F1) (x).
To listen to the radio while recording
Press (SOURCE) repeatedly to select “FM” or
“AM.”
Each time you press (SOURCE), the source
changes as follows:
FM t AM t AUX* t CD t FM
When you select “CD,” the track being recorded
is played.
* If “AUX” is not displayed when selecting the source,
set “AUX Skip” in “Setup” to “Off” (page 56).
1
2
3
4
REC
REC
In the default setting, REC Continue is set to
“On” (to continue recording after ignition is
turned off, and turn off the unit automatically
after recording has completed). For details, see
“Changing the sound and display settings” on
page 51.