Filter
Top Products
47
Adjusting the equalizer curve
You can adjust and store the equalizer settings
for frequency and level.
1 Press (SOURCE) to select a source.
2 Press the L dial, then rotate the L dial
to select “EQ7.”
3 Press the L dial.
4 Rotate the L dial to select the desired
equalizer curve, then press (F2)
(TUNE).
5 Press the L dial repeatedly to select
the desired frequency.
Each time you press the L dial, the frequency
changes as follows:
62Hz t 157Hz t 396Hz t 1.0kHz t
2.5kHz t 6.3kHz t 16kHz t 62Hz
6 Rotate the L dial to adjust the level.
The level is adjustable between
–10 to +10 steps.
7 Press (F3) ().
The normal display appears.
To restore the default setting
Press (F2) (INIT) in step 5.
Adjusting the bass and treble
— BAS/TRE
1 Press (SOURCE) to select a source.
2 Press the L dial.
The sound list display appears.
3 Rotate the L dial to select “BAS” or
“TRE,” then press the L dial.
4 Rotate the L dial to adjust the level.
The bass/treble level is adjustable between
–10 to +10 steps.
5 Press the L dial.
The normal display appears.
Note
If DSO is set to “On,” or EQ7 is selected, the effects of
BASS and LOUD may be hard to be recognized.
SOURCE
L dial