Filter
Top Products
4-4
Playback Controls Mark Levinson
camera angle
Some DVDs contain multiple angles of a particular scene. The remote
control angle button opens the angle status menu, which is used to select
the desired camera angle.
Camera angle selection is available for scenes recorded from multiple
camera angles. Camera angle selection is not available for other disc
formats or for DVD scenes recorded from one camera angle. In addition,
camera angle selection is not available unless playback is activated.
The Angle Indicator Icon parameter (page 3-32) activates and deactivates
the indicator. When set to On, the indicator appears in the on-screen
display when playback of a scene recorded from multiple camera angles is
in progress. When set to Off, the indicator does not appear in the on-
screen display when playback of a scene recorded from multiple camera
angles is in progress.
To select a camera angle:
1. When playback is activated, press the angle button to open the angle
status menu.
• The angle status menu indicates the number of the selected
camera angle and the number of camera angles from which the
currently playing scene was recorded. For instance, angle: 1/2
indicates that camera angle 1 of 2 is selected.
• If the angle status menu indicates that camera angle 1 of 1 is
selected, the currently playing scene was recorded from one
camera angle. In this case, camera angle selection is not available.
• If the angle status menu does not open at the top of the on-screen
display, camera angle selection might not be available for the
loaded disc.
2. When the Angle bar opens, press the angle button again to cycle
through all camera angles available for the currently playing scene.
The remote control number buttons can also be used to enter the
number of the desired camera angle (if known).
Note:
The Angle bar automatically closes a few seconds after the last command is
received. If this occurs, playback will automatically activate from the selected
camera angle.
3. When the desired camera angle is selected, press the enter or return
button to close the menu and activate playback from the selected camera
angle, or wait a few seconds and the menu will automatically close
and playback will begin.