Filter
Top Products
3-3
Nº51 Media Player Setup Menu
Audio Setup
This section incudes all parameters that control audio output. To
access audio parameters, select Audio from the Setup menu.
Outputs: HDMI
Audio Preferences
Use the HDMI Audio Preferences option to set the output behavior of
an audio source when the Nº51 Media Player is using the HDMI
connector, and the video output switch is set to HDMI.
Dolby Digital (Setup : Audio : Outputs : HDMI Audio Preferences: Dolby
Digital)
Use the Dolby Digital option to set the output behavior of a Dolby
Digital-encoded source when the media player is using the HDMI
connector. An HDMI device will automatically communicate the
number of channels it has the ability to accept.
To select an audio format:
Using the remote control up or down button, highlight the desired
setting, and press enter.
• Select Encoded if the associated component is compatible with
Dolby Digital-encoded sources. The Nº51 Media Player will pass
Dolby Digital signals directly to the associated component.
• Select PCM if the associated component is not compatible with
Dolby Digital encoded sources. The Nº51 Media Player will
downmix Dolby Digital signals to 2-channel PCM before being
sent to the HDMI output.
Setup
Audio
Video
Disc
General
Setup Audio
Outputs
Volume Control
A/V Sync Delay 0ms
Reset Audio Settings
Parameter Default Possible Settings
Dolby Digital Encoded Encoded, PCM
DTS Encoded Encoded, PCM
Enable On On, Off
Setup Audio Outputs
HDMI Audio Preferences
S/PDIF Audio Preferences
Analog Audio Preferences
Setup Audio
Outputs
Volume Control
A/V Sync Delay 0ms
Reset Audio Settings
Setup Audio Outputs HDMI
Dolby Digital Encoded
DTS Encoded
Enable On