Filter
Top Products
19
6 MEMORY CHANNELS
993~0lennahC a 993~0lennahC
ycneuqerfevieceR
a
ycneuqerfevieceR
ycneuqerftimsnarT
a
ycneuqerftimsnarT
ycneuqerfenoT
a
ycneuqerfenoT
noitceridtesffO
a
noitceridtesffO
ycneuqerfSSCTC
a
ycneuqerfSSCTC
edocSCD
a
edocSCD
SCD/SSCTC/enoT
sutatsFFO/NO
a
SCD/SSCTC/enoT
sutatsFFO/NO
ycneuqerftesffO
a
ycneuqerftesffO
NOesreveR
a
NOesreveR
ezispetsycneuqerF
a
ezispetsycneuqerF
lennahcyromeM
eman
a
lennahcyromeM
eman
NOgninuTeniF
a
NOgninuTeniF
noitcelesedoM
a
noitcelesedoM
lennahCyromeM
FFO/NOtuokcoL
a
lennahCyromeM
FFO/NOtuokcoL
993~0lennahC a
,1rP,9U/9L~0U/0L
9–I~0–Idna2rP
ycneuqerfevieceR
a
ycneuqerfevieceR
ycneuqerftimsnarT
a
ycneuqerftimsnarT
ycneuqerfenoT
a
ycneuqerfenoT
noitceridtesffO
a
noitceridtesffO
ycneuqerfSSCTC
a
ycneuqerfSSCTC
edocSCD
a
edocSCD
SCD/SSCTC/enoT
sutatsFFO/NO
a
SCD/SSCTC/enoT
sutatsFFO/NO
ycneuqerftesffO
a
ycneuqerftesffO
NOesreveR
a
NOesreveR
ezispetsycneuqerF
a
ezispetsycneuqerF
lennahcyromeM
eman
a
lennahcyromeM
eman
NOgninuTeniF
a
NOgninuTeniF
noitcelesedoM
a
noitcelesedoM
lennahCyromeM
NOtuokcoL
a
lennahCyromeM
FFOtuokcoL
The tables above illustrate how data is transferred
between memory channels.
Note: When transferring an odd-split channel, the Reverse
status, Offset direction, and Offset frequency are not transferred
{page 15}.
CALL CHANNEL
The Call channel can be recalled instantly no
matter what frequency the transceiver is operating
on. For instance, you may use the Call channel as
an emergency channel within your group. In this
case, the Call Scan {page 25} will be useful.
The default Call channel frequencies are
144.000 MHz for the 2 m band, 223.000 MHz for
1.25 m band (TH-F6A), 430.000 MHz (TH-F7E)/
440.000 MHz (TH-F6A) for the 70 cm band. Each
Call channel can be reprogrammed either as a
simplex or odd-split channel.
Note: Unlike Memory channels 0 to 399, the Call channel cannot be
cleared. Clearing the Call channel will set it to the factory default
values.
RECALLING THE CALL CHANNEL
1 Press [BAND] to select an amateur radio band.
2 Press [CALL] to recall the Call channel for that
operating band.
• The Call channel frequency and “C” appear.
• To return to the previous frequency, press
[CALL] again.
REPROGRAMMING THE CALL CHANNEL
1 Press [BAND] to select your desired amateur
radio band.
2 Select your desired frequency and related data
(Tone, CTCSS, DCS, or offset direction, etc.).
• When you program the Call channel as an odd-
split channel, select a receive frequency first.
3 Press [F], [CALL].
• The selected frequency and related data are
stored in the Call channel for the selected
band.
To also store a separate transmit frequency, continue
with the following steps.
4 Select the desired transmit frequency.
5 Press [F].
6 Press [PTT]+[CALL].
• The separate transmit frequency is stored in
the Call channel.
Note:
◆
The transmit frequency must be on the same band as the
receive frequency band.
◆
Call channel data is shared between the A and B-band.
◆
The Reverse status cannot be not stored in the Call channel.
◆
When you recall an odd-split Call channel, “+” and “–” appear on
the display.
◆
Transmit offset status and Reverse status are not stored in an
odd-split Call channel.
◆
When you revise only the transmission frequency for the odd-split
Call channel, the frequency step size must be the same as the
original odd-split Call channel memory data.