Filter
Top Products
34
10 UTILIZING THE B-BAND
SELECTING A MODE FOR THE B-BAND
When using the B-band receiver, the following
receiving mode is available.
edoMgnivieceR segnaRycneuqerFelbaliavA
BSU/BSLzHk001 ≤ zHM074<f
WCzHk001 ≤ zHM074<f
MAzHk001 ≤ zHG3.1<f
MFzHk001 ≤ zHG3.1<f
MFWzHM7.92 ≤ zHG3.1<f
LSB/ USB/ CW/ AM/ FM/ WFM
To select the receiving mode for the B-band:
1 Press [VFO].
2 Press [A/B] to select the B-band.
3 Press [BAND], then turn the Tuning control or
press [ ]/ [ ] to select the desired frequency.
4 Press [F], [BAND] repeatedly until you select the
desired receiving mode. The mode icon cycles
from FM ➞ WFM ➞ AM ➞ LSB ➞ USB ➞ CW,
and then goes back to FM.
Note:
◆
“FMN” appears in place of “FM” when you select “ON” for the
Menu No. 29 (FM NARROW) {page 39}.
◆
Select “WFM” when you receive the audio signal of the
broadcasting stations, such as FM or VHF TV stations.
◆
If the Fine Tuning function is ON {page 35}, you cannot select FM
mode (FM/ NFM/ WFM). To select FM mode, turn the Fine
Tuning function OFF.
BAR ANTENNA
Although the supplied wide-band helical antenna is
used for receiving B-band frequencies, due to the
size and length limitation, it may not be suitable for
low HF band (below 10.1 MHz) reception. The
transceiver features a built-in bar antenna for the
reception frequency below 10.1 MHz. The
transceiver automatically switches to the bar antenna
when you select a frequency below 10.1 MHz for the
B-band. However, you can connect an external
antenna to the antenna connector instead.
To disable the built-in bar antenna below 10.1 MHz:
1 Press [MNU].
2 Turn the Tuning control or press [ ]/ [ ] to select
Menu No. 26 (BAR ANT).
3 Press [ ] or [MNU].
4 Turn the Tuning control or press [ ]/ [ ] to select
“DISABLED”.
5 Press [ ] or [MNU] to store the setting.
Note: The bar antenna is embedded in the base of the transceiver,
horizontally. The antenna has the same characteristics as a dipole
antenna. If the target station’s signal is weak, rotate the transceiver
to find the best receiving position.
dnaB ycneuqerF petS edoM
dnabMA
zHk025~zHk001zHk5MA
zHM17.1~zHk025zHk01MA
FH
zHM5.3~zHM17.1
zH001
)NOENIF(
MA
zHM0.4~zHM5.3BSL
zHM0.7~zHM0.4MA
zHM3.7~zHM0.7BSL
zHM1.01~zHM3.7MA
zHM51.01~zHM1.01WC
zHM0.41~zHM51.01MA
zHM53.41~zHM0.41BSU
zHM860.81~zHM53.41MA
zHM861.81~zHM860.81BSU
zHM0.12~zHM861.81MA
zHM54.12~zHM0.12BSU
zHM98.42~zHM54.12MA
zHM99.42~zHM98.42BSU
zHM0.82~zHM99.42MA
zHM7.92~zHM0.82BSU
m6
zHM0.64~zHM7.92zHk5MF
zHM0.05~zHM0.64zHk05WMF
zHM0.25~zHM0.05zHk01MF
zHM0.86~zHM0.25zHk05WMF
zHM5.78~zHM0.86zHk5MF
dnabMFzHM0.801~zHM5.78zHk05WMF
dnabriAzHM0.731~zHM0.801zHk52MA
m2
zHM0.441~zHM0.731zHk5
MFzHM0.641~zHM0.441zHk5.21
zHM0.471~zHM0.641zHk5
VTFHVzHM0.032~zHM0.471zHk05WMF
m52.1zHM0.004~zHM0.032zHk5.21MF
zHM0.034~zHM0.004zHk5.21
mc07zHM0.044~zHM0.034zHk52MF
zHM0.074~zHM0.044zHk5.21
VTFHUzHM0.268~zHM0.074zHk05WMF
mc32
zHM0.0421~zHM0.268zHk5.21
MF
zHM0.0031~zHM0.0421zHk52
■ B-band Frequency Coverage (TH-F7E)
Note: By default, the Fine Tuning function is activated automatically
for 1.71 MHz ~ 29.7 MHz.