Filter
Top Products
5
3 GETTING ACQUAINTED
q EL
Appears when the transmit output power is set to Low
(“L”) or Economic Low (“EL”) {pages 7, 40}.
w H
Appears when the transmit output power is set to
High (“H”) {pages 7, 40}.
e LSB
Appears when lower side band (LSB) is selected for
B-band {page 34}.
r USB
Appears when upper side band (USB) is selected for
B-band {page 34}.
t CW
Appears when CW is selected for B-band {page 34}.
y WFMN
“WFM” appears when wide FM mode is selected
{page 34}. “FM” appears when normal FM mode is
selected. “FMN” appears when narrow FM mode is
selected {page 39}.
u AM
“AM” appears when AM mode is selected {page 34}.
i
Appears when a priority scan is activated {page 25}.
o FINE
Appears when a Fine Tuning function is activated
{page 35}.
!0 VOX
Appears when the VOX function is activated
{page 41}.
!1
Appears when the Automatic Simplex Check (ASC) is
activated {page 14}.
!2
Appears when the Lock function is ON {page 38}.
!3
Appears when the function key is pressed.
!4
S-meter (RX) and relative RF power meter (TX).
!5 CT
“CT” appears when the CTCSS function is activated
{page 28}.
!6
Appears when the Tone function is activated
{page 13}.
!7 DCS
Appears when the DCS function is activated
{page 29}.
!8 +/ –/
Appears when the repeater shift function is activated
{page 12}.
!9 R
Appears when the Reverse function is activated
{page 14}.
@0
Appears when the Tone Alert function is activated
{page 40}.
@1
Appears when the displayed memory channel has
been locked out {page 27}.
@2 Dot-matrix display
76 x 16 dot-matrix display. It displays various
information, such as the operating frequencies, menu
settings, and etc.
DISPLAY
14
1
15
21
22
2 3 4 5 6 7 8 9 10 11 12 13
16
17
18
19
20