Filter
Top Products
86
Data cartridge
management
7
❑ Is the data
cartridge
inserted right
before backup
and ejected right
after backup,
and stored in its
case?
Is it set to be
ejected
automatically
for backup for
scheduling?
The data recording surface of the data cartridge
is exposed in this product and contacts the head
under tension. If this situation continues for a
long time, the effect of suspended particles of
dust and tension on the data cartridge may cause
reduction of data cartridge life, errors during
backup, or failure in this product, etc.
* Insert the data cartridge before use, and eject
right after use and store in its case.
* To execute backup automatically for schedul-
ing etc, follow the procedure in "1.5 Setting
Backup Job (Setting Automatic Ejection)"
(
Jpg.66) to output automatically.
Installation
environment
8
❑ Is the
environment of
this product (the
server if it is
built in the
server) dust-
free?
This product is susceptible to its installation
environment (especially dust) because the data
recording surface is exposed inside this product.
The closer to the floor, the higher the dust level
is in general, so it is recommended to install this
product away from the floor, such as on a desk.
* Install this product in less dusty environments,
referring to the "Example of installation places
to avoid".
[Example of installation places to avoid]
•On the floor.
• High-traffic areas
• Areas close to open doors/windows. Espe-
cially, where affected by external environ-
ment, such as sandy dust, car exhaust
emission, etc.
• Areas close to air ventilating ducts (Be careful
of air conditioners, exhaust fans, etc.)
• Areas affected by cigarette smoke (Do not
smoke in the room where this product is
installed)
• Areas close to printers and affected by the
toner
• Areas close to paper-handling devices, such as
copy machines, shredders, or fax machines,
that are affected by paper particles.
Reconsider installation place in case that dust
accumulates at the tape slot and around the
product in a few months after installation.
Classification No Check Check item Description / tasks (*)