Filter
Top Products
74
3.2 Handling the Data Cartridge
This section describes the points to note when handling the data cartridge used for this product.
Follow the notes below when handling the data cartridge.
• Keep the data cartridge clean.
• Check the following points before using the data cartridge.
- There is no damage to or cracks in the data cartridge.
- The label is correctly attached to the data cartridge.
J"3.2.1 Setting the Data Cartridge Label"(pg.74)
- The leader pin is correctly attached to the data cartridge.
J"3.2.4 Checking the Condition of the Leader Pin on the Data Cartridge"(pg.76)
• Do not insert a damaged data cartridge into this product.
• Do not open the data cartridge to take the magnetic tape out.
• Do not directly touch the magnetic tape.
• Do not expose the data cartridge to direct sunlight or place it in a humid place.
• Do not leave the data cartridge near a strong magnetic field (e.g. near a display device or speaker).
• Do not use a data cartridge that has had a strong shock such as being dropped or falling.
3.2.1 Setting the Data Cartridge Label
A label to be attached to the data cartridge is provided with the data cartridge. Attach the label at the
location shown in the following figure. Write the starting date of the data cartridge use to specify the
expiration date.
` Make sure to use the provided label.
` Do not attach the label to a location other than the specified one.
Area for the label to be attached
Starting date: Jan 31 2007
<Example of the label>