Filter
Top Products
1 How to Install and Introduce this product to a Server 61
E
1.3 Installing and Connecting to the Server
For the procedures for installing and connecting this product to the server, refer to the "User's Guide"
in the "Document & Tool CD" provided with the server. If no description is found in the "User's
Guide", refer to the explanation in "Tape Drv LTO2 Ultrium2 200GB (PG-LT201)".
Connect this product to LVD SCSI Interface. Do not connect other devices on the SCSI cable that this
product is connected to.
` When connecting this product to PRIMERGY TX200 S3, RX600 S2, RX600 S3, RX600 S3
(SAS model) or use the extension power cable supplied with the product.
To install the product in PRIMERGY TX200 S3, install it in the bay placed in the top of the
five inch storage bay.
When connecting this product to SCSI Ctrl U160 (PG-128 / PGB128 or PG-1281 / PGB1281), use
the LVD/SE connector. Do not use the connector for the SCSI Ctrl U160 external device with which
this product is connected.
This product (rear)
Connect the SCSI cable
Connect
the power cable
of the server
Extension power cable
(supplied with this product)
Connect to
this product
Do not use
Do not use