Filter
Top Products
64
1.4.2 Device Driver Installation (For PRIMERGY FT)
Notes
• This product can be installed only to FT1. It cannot be installed to FT2.
• Two of this product cannot be installed at the same time.
• This product can only be used from a FTvirtual Server (professional-use OS). This product cannot
be used from a CoServer (input-output OS).
• FT model cannot restore the system using Automated System Recovery (ASR) set or system
recovery disk. For restoration, use the recovery CD supplied with the server.
• For installation of the internal 5-inch option, refer to the "User’s Guide" of the FT model.
For Windows Server 2003
1
Install this product to FT1.
2 Turn on the power of FT1 and FT2, and start the CoServer in online
mode.
3 Log on to the CoServer1 with administrator privileges.
4 Click the [Start] button → [Control Panel] → [System].
5 Select the [Hardware] tab and click [Device Manager].
The device manager starts.
6 Double click [Other devices], and then double click [QUANTUM
ULTRIUM 3 SCSI Sequential Device].
7 Select the [Driver] tab and click [Update Driver].
The Setup Wizard appears.
8 When the "Can Windows connect to Windows Update to search for
software?" message appears, click [No, not this time] and then
click [Next >].
Follow the wizard for installation.
9 For installation methods, click [Install from a list or a specific
location] and click [Next >].
10 For search and installation options, select [Search for the best
driver in these locations] and set the following options.
• Uncheck [Search removable media (floppy, CD-ROM, etc.)].
• Check [Include this location in the search] and specify the folder which restored the device
driver.
• When restored in the floppy disk drive A
A:\LTO3HH