Filter
Top Products
80
6
Troubleshooting
Troubleshooting for LED display
The following table explains the meaning of LEDs and the troubleshooting method. If this product is
not running properly during use, follow the indications on the table. If the problem is not resolved
after performing the following troubleshooting, contact an office listed in "Appendix C Contact
Information" (
Jpg.92).
LED display
: OFF, : ON, : Blinking (once a second), : Flashing (four times a second)
LED Display Status Troubleshooting Method
: OFF
: OFF
: OFF
: OFF
The device is turned off. When this status is indicated although the
power is supplied to the server, check that the
server and the device are connected correctly.
If the problem is not resolved, this product
may be in failure.
: ON
: OFF
: OFF
: OFF
The device is turned on and
ready for operation.
Normal status: no operation needed.
: ON
: Blinking
: Blinking or OFF
: Blinking
Self-diagnostic test when
the power is on, and initial-
ization are in operation.
On activating the power, wait until only
POWER LED is on. If this occurs other than
immediately after the power activation,
check if the server and this device are con-
nected correctly. If the problem is not
resolved, this product may be in failure.
: ON
: OFF
: Flashing
: ON
An error has occurred at the
self-diagnostic test when
the power is on.
Shut down and restart the server. If the prob-
lem is not resolved, this product may be in
failure.
: ON
: Blinking
: OFF
: OFF
This device is running
(loading/unloading a data
cartridge, rewinding, writ-
ing/reading data, etc.).
When a data cartridge is inserted and operat-
ing, the status is normal: no operation
needed. If this occurs with no cartridge
inserted, this device may be in failure.
: ON
: OFF
: OFF
: ON
Need cleaning. CLEAN
LEDis turned on in the fol-
lowing situations.
• This device itself
estimates that cleaning is
necessary.
• Duration of the data
cartridge operation
exceeds 100 hours.
Clean with a cleaning cartridge.
J"4 Cleaning"(pg.77)
POWER
ACTIVITY
ERROR
CLEAN
POWER
ACTIVITY
ERROR
CLEAN
POWER
ACTIVITY
ERROR
CLEAN
POWER
ACTIVITY
ERROR
CLEAN
POWER
ACTIVITY
ERROR
CLEAN
POWER
ACTIVITY
ERROR
CLEAN