Filter
Top Products
Appendix A Operation Checksheet (Installation/Operation Check) 85
E
Cleaning
4
❑ Are replacement
operations
occurring for
the used
cleaning
cartridge (When
the cleaning
cartridge is
inserted the
CLEAN LED
blinks rapidly
and the
cartridge is not
ejected)?
If the cleaning cartridge does not automatically
eject and the CLEAN LED blinks rapidly after
the cartridge is inserted into this product, the
cleaning cartridge has reached the end of its
usage lifetime.
* In this case, replace the cleaning cartridge with
a new one.
Data cartridge
management
5
❑ Is the
commencing
date for use
written on the
data cartridge?
(Approximate
replacement:
after one year)
The data cartridge is a replaceable part. A worn
data cartridge will cause problems such as mag-
netic tape surface damage, dirty head, many
media errors, etc. To avoid missed backup due to
a worn data cartridge, replacement is required
for Fujitsu authorized product after one year of
use or after being used 1000 times, whichever
comes first.
* In this case, replace the data cartridge with a
new one. Using a Fujitsu authorized data
cartridge is recommended.
6
❑ When the
CLEAN LED
turns on
immediately
during backup,
or if the data
cartridge is eject
delay/
unloadable, is
the data
cartridge
replaced?
When the data cartridge life is over, it detects
head dirt during backup and the CLEAN LED
tends to turn on. Also, ejecting the data cartridge
may take a long time, or the data cartridge may
be unloadable.
* In these cases, replace the data cartridge with a
new one regardless of the number of times/
period that used, and see how it works. It is
recommended to check the number of times/
period that used of other data cartridges and
replace them all since the data cartridges close to
the end of the replacement cycle may have
serious damage.
Classification No Check Check item Description / tasks (*)