Filter
Top Products
7 Specifications 83
E
7
Specifications
This chapter describes the specifications for this product.
The following shows the installation environment conditions
For details about the installation environment refer to "1.1 Checking the Installation Environment"
(
Jpg.59)".
Item Functions and Specifications
Product name Tape Drive LTO3 Ultrium3/Ultrium2 400GB
Product ID PG-LT302/PGBLT302/PGBLT302C
Data memory capacity (no compression) 400GB
[*1]
(When using Ultrium3 data cartridge)
200GB
[*1]
(When using Ultrium2 data cartridge)
Data transmission rate (no compression) 64MB/s
[*2]
(When using Ultrium3 data cartridge)
Data format Ultrium2, Ultrium3 format
(The format depends on the data cartridge.
Ultrium1 format is read only.)
Interface Ultra 160 SCSI
Dimension (mm) Width 149.1 × Height 43.1 × Depth 222.6
Weight 1.7kg
Power consumption Maximum 36W (Average 12.5W in a standby
mode)
Heat dissipation Maximum 129.6 kJ/h
*1: 1GB = 1000 × 1000 × 1000 bytes conversion
*2: 1MB = 1024 × 1024 bytes conversion
Item Installation conditions
Temperature Operating 10 - 35
°C
Resting -5 - 55
°C
Humidity Operating/Resting 20 - 80%RH (non-condensing)
Temperature ramp Operating/Resting Below 15
°C/hr (non-condensing)
Maximum wet-bulb temperature 26 °C
Dust Below 0.15mg/m
3