Filter
Top Products
1 How to Install and Introduce this product to a Server 63
E
For Windows 2000 Server
1
Log on to the Windows 2000 Server with administrator privileges.
2 Click the [Start] button → [Settings] → [Control Panel].
3 Double click the [System] icon.
4 Select the [Hardware] tab and click [Device Manager].
5 Double click [Other devices], and then double click [QUANTUM
ULTRIUM 3 SCSI Sequential Device].
6 Select the [Driver] tab and click [Update Driver].
The "Welcome to the Device Driver Upgrade Wizard" message appears.
7 Click [Next].
8 Select [Find the best driver for the device], and click [Next].
9 Select [Specify the location], click [Next], set the folder which
restored the device driver in the copy source, and click [OK].
• When using the supplied driver floppy disk (or when the downloaded device driver was
restored in a floppy disk)
A:\LTO3HH
• When using CD-ROMs such as ServerStart
[CD-ROM]:\DRIVERS\tape\LTO3HH
The "The following device driver is found" message appears.
10 Click [Next].
The "Completing the Device Driver Upgrade Wizard" message appears.
11 Click [Complete], and click [Close].
The "Quantum LTO 3 Tape Drive" appears under "Tape Drive".
12 Restart the server.