Filter
Top Products
84
Appendix A
Operation
Checksheet (Installation/
Operation Check)
This product is a precision instrument and improper daily operation (cleaning/ data cartridge
management/ installation environment, etc.) will lead to troubles such as backup failure.
Use the following "Operation Checksheet" to prevent trouble in backup operations. The following
items are recommended operations by Fujitsu.
Classification No Check Check item Description / tasks (*)
Cleaning
1
❑ Is magnetic
head cleaning
performed once
every three
months?
Periodical cleaning is required as the magnetic
head accumulates dust or dirt regardless of the
use of this product. If soiled with dust or dirt, the
magnetic head may scratch the surface of the
tape or reduce the life of the data cartridge. This
product provides a function that causes the
CLEAN LED to light up after 100 hours of use
urging you to perform cleaning.
* Clean this product every three months.
2
❑ Is cleaning per-
formed when
the CLEAN
LED turns on?
This product provides a function that causes the
CLEAN LED to light up after 100 hours of use
or when it judges that cleaning is required,
urging you to perform cleaning.
If the product is used while the CLEAN LED is
on, the data cartridge and backup data may be
damaged. It is also possible that the worn-out
data cartridge will soil the head, etc.
* When the CLEAN LED turns on, immediately
perform cleaning. If the CLEAN LED turns on
again, consider replacing the data cartridge.
3
❑ Do you have a
cleaning
cartridge
prepared for
replacement?
The cleaning cartridge is required to be replaced
at the earlier timing of either after being used 50
times or after five years of use.
* Replace the cleaning cartridge periodically
according to the operations.
* To be ready, have a new cleaning cartridge
handy when the time for replacement
approaches.