Fujitsu PG-LT302 Portable Media Storage User Manual


 
55
E
CAUTION
Recycle
When scrapping this product, contact an office listed in "Appendix C Contact Information" (Jpg.92).
This product must be disposed of as industrial waste.
Do not disassemble, or take this product apart.
Do not operate or store this product in the following environments.
- Areas of extremely low temperature
- Areas of extremely high temperature or humidity
- Areas that experience extreme temperature changes
- Areas exposed to magnetic fields
- Areas exposed to shocks or vibration
- Dusty or dirty areas (cigarette smoke, emissions)
- Areas in direct sunlight
- Areas near radiators or other heat sources
If this product is moved from cold areas to hot areas or if room temperature
suddenly rises, internal condensation may form.
If this product is used after condensation has formed, it may damage this product
or the data cartridge. After a large change in temperature, do not turn on the
power for 1 hour.
Eject the data cartridge from this product whenever turning the server off. After
inserting the data cartridges into this product, the magnetic tape recording
surface is exposed. If this situation continues for a long time, dust may stick to the
recording surface or the magnetic tape may be damaged. This might destroy the
data cartridge permanently.
Eject data cartridges when not using them.
Do not carry this product with the data cartridge left in it.
Do not forcibly insert the data cartridge.
Do not use this product if foreign objects such as metals have fallen into this
product. If some foreign objects have fallen into this product, contact an office
listed in "Appendix C Contact Information" (Jpg.92).
If the front surface of this product is stained, wipe with a soft, dry cloth or a cloth
wet with water or mild detergent. Do not use benzine, thinner or any volatile
compounds.