Filter
Top Products
70
The symbols in the following table represent the subsequent status shown.
: OFF, : ON, : Blinking (once a second), : Flashing (four times a second)
• POWER LED display
• ACTIVITY LED/ERROR LED/CLEAN LED display
LED Display Status
POWER: OFF Power to the device is off.
POWER: ON Power to the device is on.
LED Display Status
: ON
: OFF
: OFF
: OFF
This device is turned on and is available for operation.
: ON
: Blinking
: Blinking or OFF
: Blinking
Self-diagnostic test and initialization at power-on state are running.
: ON
: Blinking
: OFF
: OFF
This device is running (loading/unloading a data cartridge, rewind-
ing, writing/reading data, etc.).
: ON
: OFF
: OFF
: ON
Needs cleaning.
CLEAN LED is turned on in the following situations.
• The device estimates that cleaning is necessary.
• Duration of the data cartridge operation has exceeded.
Clean with a cleaning cartridge.
J"4 Cleaning"(pg.77)
: ON
: ON
: OFF
: ON
Cleaning task is running.
: ON
: ON
: OFF
: Flashing
The cleaning cartridge has come to the end of its lifetime (used more
than 50 times). Use a new one.
J"4 Cleaning"(pg.77)
: ON
: OFF
: Flashing
: Flashing
An error on the cleaning cartridge or media error on the data cartridge
has occurred. If a data cartridge has not been installed, an error has
occurred on the cartridge previously used.
J"6 Troubleshooting"(pg.80)
: ON
: OFF
: Flashing
: OFF
Unrecoverable error has occurred.
J"6 Troubleshooting"(pg.80)
POWER
ACTIVITY
ERROR
CLEAN
POWER
ACTIVITY
ERROR
CLEAN
POWER
ACTIVITY
ERROR
CLEAN
POWER
ACTIVITY
ERROR
CLEAN
POWER
ACTIVITY
ERROR
CLEAN
POWER
ACTIVITY
ERROR
CLEAN
POWER
ACTIVITY
ERROR
CLEAN
POWER
ACTIVITY
ERROR
CLEAN