Filter
Top Products
57
GB
Optional Components
Listening to audio from a
connected component
Listening to a digital
component such as digital
satellite receiver, DVD
player, etc.
1 Connect a digital optical cable.
See “Hooking up optional components” on
page 56.
2 Press FUNCTION repeatedly until
“OPTICAL IN” appears.
Start playing the connected component.
Note
Sound from the component connected to the
DIGITAL OPTICAL IN jack is inaudible while the
indicator is flashing or when there is no indicator
(“L”, “F” or “P”) displayed.
Listening to an analog
component such as MD deck,
cassette deck, etc.
1 Connect an audio cord.
See “Hooking up optional components” on
page 56.
2 Press FUNCTION repeatedly until “MD”
or “TAPE” appears.
Start playing the connected component.
To switch the function from “MD” to
“TAPE”
When you listen to the connected tape deck, do
the following procedure.
1 Turn on the system.
2 Press FUNCTION repeatedly until “MD”
appears.
3 Press MENU/NO on the remote.
“TAPE?” appears.
4 Press ENTER/YES on the remote.
To switch back to “MD”, do the procedure
again.
Recording audio from a
connected component
Making a digital recording
from a digital component to
the HD
The Serial Copy Management system (see page
23) may prevent you from making a digital
recording of certain material. In this case,
connect the component to the MD/TAPE IN
jack and make an analog recording.
1 Connect a digital optical cable.
See “Hooking up optional components” on
page 56.
2 Start recording manually.
See “Recording to the HD manually” on
page 26.
Tip
You can activate Smart Space/AutoCut (see page 28)
functions.
Making an analog recording
from an analog component to
the HD
1 Connect an audio cord.
See “Hooking up optional components” on
page 56.
2 Start recording manually.
See “Recording to the HD manually” on
page 26.