Filter
Top Products
26
GB
Recording to the HD
manually
— Manual Recording
Tracks are stored in an album in the Flexible
area.
1 Press FUNCTION repeatedly to select
the sound source
• CD: For recording a CD loaded in the
system. If “AUTO” appears, press
STORAGE MODE until “AUTO”
disappears.
• FM/AM: For recording from the system’s
tuner.
• OPTICAL IN: For digital recording from
an optional componet.
• MD (or TAPE): For analog recording
from an optional componet.
2 Press REC.
“REC” appears in the display.
The HD stands by for recording.
To change the album position, turn
ALBUM dial (or press ALBUM + or – on
the remote repeatedly).
3 Press HD u (or HD N or HD X on the
remote), and then start playing the
sound source.
To stop recording
Press HD x.
Tips
• If you hear noise while recording an AM radio
station, reorient the AM loop antenna to reduce the
noise.
• You can use Program Play to select specific CD
tracks to be recorded. After loading a CD, do the
procedure “Programming the CD tracks” on page
15, and then do the recording procedure afterwards.
Notes
• Manual recording cannot be performed when Auto
Storage is selected as the storage mode.
• Tracks longer than 120 minutes cannot be recorded.
If the recording time has reached 120 minutes, the
track number increases by one automatically. If the
track number cannot be incremented, recording
ends.
• If the selected album is one that contains 400 tracks
at the time you press REC, the sound source is
recorded to the album that is closest in number with
recording space.
• CD text is not saved to the HD during manual
recording of a CD.
If “Check OPT-IN” flashes in the
display
• The digital sound source is not connected as
you selected with FUNCTION. Connect the
sound source properly.
• The sound source is not turned on. Turn on
the sound source.
Recording tips
— Making tracks/Smart Space/
Adjusting the recording level
Making tracks
• Automatically during recording
(Level Synchro Recording)
Track numbers are automatically marked as on
the original source during recording from this
system’s CD player or components connected
to the DIGITAL OPTICAL IN jack. However,
track numbers are not marked depending on the
track.
Use the Level Synchro Recording function to
automatically mark track numbers during
recording from this system’s tuner or
components connected to the MD/TAPE IN
jack. However, track numbers are not marked
automatically if the sound source to be
recorded is noisy (e.g., tapes or radio
programs).