Filter
Top Products
44
GB
Using the display
Checking the remaining time
(CD/HD)
Press TIME on the remote repeatedly
during normal playback.
The display changes cyclically as follows:
Elapsed playing time on the current track t
Remaining time on the current track* t
Remaining time on the current CD or album
* “--.--” appears when you check the remaining time
of a CD track whose number is 21 or over.
Checking the total playing
time (HD)
Press TIME on the remote in stop mode.
The display changes as follows:
Total playing time on the current album y
Percentage of the HD area used as a total
recorded time
Checking a track title or a
disc title (CD)
Press DISPLAY repeatedly.
The display changes cyclically as follows:
Clock display t Preset Equalizer name t
Volume t Track title or disc title*
* The track title appears during playback, and the disc
title appears when the system is stopped.
Display
Turning off the display
— Power Saving Mode
Even if the system is off, the system consumes
power to display the clock and to stay
responsive to commands from the remote.
Power Saving mode reduces the amount of
power consumed during standby.
In this mode, the clock is not displayed.
Press DISPLAY or TIME on the remote
while the system is off.
To cancel Power Saving mode
Press DISPLAY or TIME on the remote while
the system is off.
The display changes as follows:
Clock display* y No display (Power Saving
mode)
* The clock is displayed only if you set the clock.
Tip
The timer continues to operate during Power Saving
mode.
Changing the illumination
level
You can change the illumination level for the
front panel.
Press DIMMER on the remote repeatedly.
The illumination level changes cyclically as
follows:
High t Low t Off
Tip
The illumination level is factory set to high.