Filter
Top Products
Advanced Operations
62
When connecting to the AV3 input terminals on the front
of the unit. (
l
13)
Before connecting any cables, first make sure that the power for
both units is off. Then after connecting any cable, turn on the
both units.
Note
≥If the audio output of the other equipment is monaural, connect to
L/MONO. (Both left and right channels are recorded when
connected through L/MONO.)
Preparation
DVD [RAM] [DVD-R]
≥Release protection (disc l 28, cartridge l 15). [RAM]
≥Press [DVD].
VHS
≥Confirm a video cassette with an intact erasure prevention tab.
(l 50)
≥Press [VHS].
[1] Press [REC MODE] to select the recording
mode.
(DVD l 24, VHS l 53)
≥DVD [RAM] [DVD-R]
- It is also possible to perform the Flexible Recording (FR).
(l 24)
[2] While stopped
Press [CH, W, X] or [INPUT SELECT] to select
the input channel.
≥Select AV3.
[3] Start play on the other equipment.
[4] Press [¥, DVD REC] at the point you want to
start recording.
[3] Press [1, PLAY].
Start playing the video cassette and find the recording start point.
[4] Press [;, PAUSE], then press [¥, VHS REC].
Put the unit in the recording standby mode.
[5] Start play on the other equipment.
[6] Press [;, PAUSE].
≥VHS recording and disc play start at the same time.
∫To skip unwanted parts
Press [;, PAUSE] to pause recording. (Press again to restart recording.)
∫To stop recording
Press [∫, STOP].
Note
≥Stop play on the other equipment as well.
≥This unit does not support recording the signal from a personal computer.
≥When recording bilingual programmes
-
When “M1” and “M2” is selected on the connected equipment, you can choose the audio mode in playback. [RAM]
-
Select either M1 or M2 on the connected equipment. (You cannot select the audio mode in playback.) [DVD-R]
≥When the output signal from the external equipment is NTSC, change the “TV System” to “NTSC” in the SETUP menu (l 45).
For your reference
≥Almost all videos and DVD software on sale have been treated to prevent illegal copying. These software cannot be recorded.
The child lock deactivates all buttons on the unit and remote control. Use it to prevent other people from operating the unit.
To activate the child lock
Hold down [ENTER] and [RETURN] simultaneously until “t HOLD” appears on the unit’s display.
≥If you press a button while the child lock is on, “t HOLD” appears on the unit’s display and operation is disabled.
To cancel the child lock
Hold down [ENTER] and [RETURN] simultaneously until “t HOLD” disappears.
SLOW/
SEARCH
REW
FF
DVD/VHS
CREATE
CHAPTER
SKIP/INDEX
PLAY
STOP
PAU SE
TRACKING/V-LOCK
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
PROG/CHECK
VHS REC
TIME SLIP
STATUS
DVD RECREC MODE
DVD/VHS
CANCEL/RESET INPUT SELECT
DIRECT TV REC
TIMER
VHS
G-Code
CREATE
CHAPTER
CH
AV
VOLUME
DVD
JET REW
ENTER
DISPLAY
µ
µ
DUBBING
AUDIOEXT LINK
VHS REC
DVD REC REC MODE TIMER
VHS
DVD
JET REW
REC MODE
1
RETURN
;
∫
INPUT SELECT
ENTER
CH, W, X
DVD
VHS
Recording from an external device
1 DVD 1 VHS
Child Lock
VHSDVD
75VGN.book 62 ページ ２００４年７月２１日 水曜日 午前１１時５４分