Filter
Top Products
56
Advanced Operations
You can change the settings on VHS only with the following
procedure.
For the settings on DVD, press [DVD], [FUNCTIONS], and then
select “SETUP“. (l 42)
[1] While stopped
Press [FUNCTIONS].
[2] Press [3, 4] to
select a desired
item.
[3] Press [ENTER]
or [2, 1] to
change the
setting.
∫To exit the VHS FUNCTIONS screen
Press [RETURN].
This description shows the initial settings for this unit. For
details on menu operation (l left).
≥Underlined items are the factory presets.
∫VHS FUNCTIONS
Timer recording
(l 54)
QUICK ERASE (l 57)
You can delete a cassette contents all at once.
Tape length
Set the length of tape you are using so the unit can show the correct
remaining time.
[AUTO (
2E-240)] [E-195] [E-260] [E-300]
[AUTO (
2E-240)]: The VHS automatically distinguishes E30,
-60, -90, -120, -180 and -240 tapes.
[E-195]: For E195 tape
[E-260]: For E260 tape
[E-300]: For E300 tape
PB Colour system
When the colour of the display does not look natural during playback
of the tape, select either [PAL] or [MESECAM].
[AUTO
] [PAL] [MESECAM]
[AUTO
]: This unit automatically detects the format in
which the recording was made and selects the
colour system for playback.
[PAL]: To play back a video cassette recorded in the
PAL signal.
[MESECAM]: To play back a video cassette recorded in the
MESECAM signal.
SQPB
To play back tapes recorded in the S-VHS format (SQPB; S-VHS
Quasi Playback).
[AUTO
] [ON] [OFF]
[AUTO
]: This unit automatically detects the format in
which the recording was made and selects the
same format for playback. However, picture
distortion may appear. Therefore, set to [ON]
or [OFF].
[ON]: Use this setting when playing back a cassette
tape recorded in the S-VHS format.
[OFF]: Use this setting when playing back a cassette
tape recorded in the VHS format only.
OSD (l 57)
For automatic display on the TV screen of the TV station information,
type of sound system of the programme being watched and the
sound playback mode.
[4:3
][WIDE][OFF]
[4:3
]: Indications can be displayed on the TV
screen.
[WIDE]: Indications can be displayed on the TV screen
when using wide type of TV screen and
selecting the wide screen mode on the TV
setting.
[OFF]: No indications appears.
Preparation
≥Press [VHS].
Changing the unit’s settings
∫ Common procedures
SLOW/
SEARCH
REW
FF
DUBBING
DVD/VHS
CREATE
CHAPTER
SKIP/INDEX
PLAY
STOP
PAU SE
TRACKING/V-LOCK
AUDIOEXT LINK
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
PROG/CHECK
VHS REC
TIME SLIP
STATUS
DVD REC REC MODE
DVD/VHS
CANCEL/RESET INPUT SELECT
DIRECT TV REC
TIMER
VHS
VHS
G-Code
CREATE
CHAPTER
CH
AV
VOLUME
DVD
DVD
JET REW
ENTER
DISPLAY
AUDIO
FUNCTIONS
RETURN
STATUS
3, 4, 2, 1
ENTER
DVD
VHS
∫
VHS FUNCTIONS
: access
ENTER
: return
RETURN
: select
Timer recording
QUICK ERASE
Tape length : AUTO ( E - 240)
PB Colour system : AUTO
SQPB : AUTO
OSD : 4 : 3
∫ Summary of settings
VHS
75VGN.book 56 ページ ２００４年７月２１日 水曜日 午前１１時５４分