Filter
Top Products
Various Settings
44
≥Underlined items are the factory presets.
∫Picture
Comb Filter
Select the picture sharpness when recording.
The setting is fixed with “On” if you set “TV System” to “NTSC”.
[On
] [Off]
Hybrid VBR Resolution (l 63, “VBR”)
Records the video on DVD-RAM in high quality.
[Automatic] [Fixed
]
Still Mode
Select the type of picture shown when you pause play.
(l 63, “Frame and field”)
[Automatic
] [Field] [Frame]
Dubbing NR
Reduces video tape noise while dubbing.
[Automatic
] [On] [Off]
S-VHS Dubbing Setting
Select the mode from Automatic mode and SQPB mode when
dubbing from a tape recorded in S-VHS format or S-VHS ET format
to the DVD.
[Automatic
][SQPB]
≥When Automatic mode is selected, you may not achieve enough
image quality depending on the source tape. In this case, select
SQPB mode.
∫Sound
PLAY t1.3 & Audio during Search
(l 18)
Choose whether to operate the Quick View (Play k1.3) or not and
whether to have sound during search.
[On
] [Off]
≥You may hear sound regardless of this setting with some discs.
Dynamic Range Compression (Dolby Digital only)
Change the dynamic range for late night viewing.
[On] [Off
]
Bilingual Audio Selection [DVD-R]
Select whether to record the main or secondary audio type when
recording to DVD-R.
You cannot select this when recording from an external source or TP
position onto DVD-R. Select the audio on the other equipment.
[M1
][M2]
Digital Audio Output
Change the settings when you have connected equipment through
this unit’s DIGITAL AUDIO OUT terminal (l 12).
Press [ENTER] to display the menu.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz or
88.2 kHz.
≥Signals are converted to 48 kHz or 44.1 kHz despite this settings
if the signals have a sampling frequency of over 96 kHz or 88.2
kHz, or the disc has copy protection.
[On] [Off
]
Dolby Digital°
Choose whether to output Dolby Digital bitstream signals for
decoding on other equipment or to convert them to PCM signals
for 2-channel output.
[Bitstream
][PCM]
DTS°
Choose whether to output DTS bitstream signals for decoding on
other equipment or to not.
[Bitstream] [PCM
]
MPEG°
Choose whether to output MPEG bitstream signals for decoding on
other equipment or to convert them to PCM signals for 2-channel
output.
[Bitstream] [PCM]
° Set “Dolby Digital” to “PCM”, “DTS” to “PCM” and “MPEG” to
“PCM” if the other equipment doesn’t have decoders. Incorrect
settings can cause noise to be output which can be harmful to your
ears and speakers, and audio will not be recorded properly to
digital recording equipment.
On Pictures become clear and vivid. Normally, use this
setting. [RAM]
Off Select it when recording noisy pictures.
Automatic The resolution is automated to provide efficient
recording with less block noise.
Fixed The resolution is fixed to ensure there is no loss of
source picture resolution while recording.
Field Select this if jittering occurs when “Automatic” is
selected.
Frame Select this if small text or fine patterns cannot be seen
clearly when “Automatic” is selected.
Automatic Noise reduction only works on input picture from a
video tape.
On Noise reduction works for all input video.
Off Noise reduction is off.
Automatic Plays and dubs the tape with the same system as
S-VHS VCR.
The spectrum of the luminance signal (Y) is set wide
and the tape can be dubbed with its original high
resolution.
The S-VHS dubbing indicator is lit during dubbing.
≥This mode is selected as factory preset. Usually,
use this mode.
SQPB Plays and dubs the tape with the same system as
VHS VCR.
The spectrum of the Y signal is narrower than that in
the Automatic mode and you cannot achieve the
original resolution of S-VHS.
The S-VHS dubbing indicator is not lit during dubbing.
On Signals are converted to 48 kHz or 44.1 kHz. (Choose
when the connected equipment cannot process
signals with sampling frequency of 96 kHz or
88.2 kHz.)
Off Signals are output as 96 kHz or 88.2 kHz. (Choose
when the connected equipment can process signals
with sampling frequency of 96 kHz or 88.2 kHz.)
Bitstream When you have connected a unit with a built-in Dolby
Digital decoder.
PCM When you have connected a unit that doesn’t have a
built-in Dolby Digital decoder.
Bitstream When you have connected a unit with a built-in DTS
decoder.
PCM When you have connected a unit that doesn’t have a
built-in DTS decoder.
Bitstream When you have connected a unit with a built-in
MPEG decoder.
PCM When you have connected a unit that doesn’t have a
built-in MPEG decoder.
DVD
75VGN.book 44 ページ ２００４年７月２１日 水曜日 午前１１時５４分