Filter
Top Products
Before Use
17
∫How to hold a disc
Do not touch the recorded surface.
∫If there is dirt or condensation on the disc
[RAM] [DVD-R]
≥Clean with an optional DVD-RAM/PD Disc cleaner (LF-K200DCA1,
where available).
≥Do not use cleaners for CDs or cloths.
[DVD-A] [DVD-V] [VCD] [CD]
Wipe with a damp cloth and then wipe dry.
∫Handling precautions
≥Do not attach labels or stickers to discs. (This may cause disc
warping and un-balanced rotation, rendering it unusable.)
≥Do not write on the label side with a ball-point pen or other writing
instrument.
≥Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥Do not use scratch-proof protectors or covers.
≥Do not use the following discs:
-
Disc with exposed adhesive from removed stickers or labels
(rented discs etc.).
-
Discs that are badly warped or cracked.
-
Irregularly shaped discs, such as heart shapes.
≥Do not place in the following areas:
-
In direct sunlight
-
In very dusty or humid areas
-
Near a heater
[1] Press [<, OPEN/CLOSE] on the main unit to
open the tray.
You can insert a cartridge or non-cartridge disc.
Note
≥Load double-sided discs so the label for the side you want to
record/play is facing up.
≥It is not possible to record continuously from one side of a double
sided disc to the other. You will need to eject the disc and turn it
over.
≥When using 8 cm DVD-RAM, remove the disc from the cartridge
and insert it, making sure you align it with the groove.
[2] Press [<, OPEN/CLOSE] on the main unit to
close the tray.
≥If you insert a DVD-RAM with the write-protect tab set to
“PROTECT” (l 15), play starts automatically.
Disc handling Inserting discs
(2)
(1)
(3)
Non-cartridge disc
Cartridge disc
(1) Insert label-up.
(2) Insert inside the tray’s guides.
(3) Insert label-up with the arrow facing in.
DVD
75VGN.book 17 ページ ２００４年７月２１日 水曜日 午前１１時５４分