Filter
Top Products
26
Timer Recording
[RAM] [DVD-R]
You can enter up to 16 programmes up to a month in advance.
Entering G
-CODE number is an easy way of timer recording. You can
find these codes in the newspapers and magazines.
[1] Press [G-Code].
[2] Press the numeric buttons to enter the G
-CODE
number.
Press [2] to move back to correct digit.
[3] Press [ENTER].
Confirm the
programme and
correct it if necessary
using [3, 4, 2, 1].
(l right step 3.)
If “
- "” appears under “Name”, press [3, 4] to select a
desired programme position.
≥You can also press [REC MODE] to change the recording
mode.
≥After you have entered the information of a TV station, it is kept
in the unit’s memory.
≥To enter the title of the programme
Press [2, 1] to select “Programme Name” and press [ENTER]
(l 30).
[4] If the programme is
correct
Press [ENTER].
≥To continue
programming,
repeat steps 1–4.
[5] Press [ , TIMER].
≥“ ” lights on the unit’s display.
The timer recording standby mode is activated on DVD
(“ ” lights on the DVD unit’s display). However, the unit may
not be turned off automatically.
≥You can play a DVD-RAM on DVD, play or record any media on
VHS even if the timer recording standby mode is activated on DVD.
[6] Turn the unit off when you do not play on DVD
(DVD-RAM) or, play or record any media on
VHS.
≥If the timer recording is started with keeping the unit turned on,
the unit is not turned off automatically even after the timer
recording is completed.
[1] Press [PROG/CHECK].
[2] Press [ENTER].
[3] Press [1] to move and change the items with
[3, 4].
≥You may use the numeric buttons to enter “Name”, “Date”,
“Start” and “Stop”.
≥You can also press [REC MODE] to change the recording
mode.
≥Name (Programme Position/TV Station Name)
≥Date
You can also make a daily or weekly programme.
≥Start (start time)/Stop (finish time)
The time increases or decreases in 30-minute increments if
you hold the button.
≥Mode (Recording mode)
XP,.SP,.LP,.EP,.FR,.XP... (l 24)
≥VPS/PDC (This function is not available in Australia.)
ON,.OFF (
- - - ) (l 27).
≥Programme Name (Enter title)
Press [2, 1] to select “Programme Name” and press [ENTER]
(l 30).
Preparation
≥Release protection (disc l 28, cartridge l 15). [RAM]
≥Insert a disc (l 17) and confirm there is sufficient empty space
for recording on it (l 49).
≥Press [DVD].
Using G-CODE
SLOW/
SEARCH
REW
FF
DUBBING
DVD/VHS
CREATE
CHAPTER
SKIP/INDEX
PLAY
STOP
PAU SE
TRACKING/V-LOCK
AUDIOEXT LINK
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
PROG/CHECK
VHS REC
TIME SLIP
STATUS
DVD REC REC MODE
DVD/VHS
CANCEL/RESET INPUT SELECT
DIRECT TV REC
TIMER
VHS
VHS
G-Code
CREATE
CHAPTER
CH
AV
VOLUME
DVD
DVD
JET REW
ENTER
DISPLAY
PROG/CHECK
DVD
3, 4, 2, 1
ENTER
REC MODE
DIRECT NAVIGATOR
G-Code
1
Numeric
Buttons
G-Code
4:00 LP
Remain
13. 7. TUE12:53:00
Mode
StopStart
Name
Date
TIMER
RECORDING
VPS
PDC
Remain
4:00 LP
27/7 TUE 21:0020:00 SP
OFF
Programme Name
13. 7. TUE12:53:00
Manual programming
TIMER
RECORDING
Remain
4:00 LP
SP
OK
21:0020:00ARD 27/7 TUE01
Mode
Disc
space
StopStartNo.
Name
Date
New Timer Programme
OFF
VPS
PDC
13. 7. TUE12:57:00
TIMER
RECORDING
Remain
4:00 LP
13. 7. TUE12:57:00
SP
OK
21:0020:00ARD 27/7 TUE01
Mode
Disc
space
StopStartNo.
Name
Date
New Timer Programme
OFF
VPS
PDC
Highlighted line
is ready for
programming.
Mode
StopStart
Name
Date
TIMER
RECORDING
VPS
PDC
Remain
4:00 LP
Programme Name
13. 7. TUE12:53:00
:
SP
/
:
Mode
StopStart
Name
Date
TIMER
RECORDING
VPS
PDC
Remain
4:00 LP
1 ARD 24/ 7 SAT 19:0017:00 SP
OFF
Programme Name
13. 7. TUE1:19:10
DVD
75VGN.book 26 ページ ２００４年７月２１日 水曜日 午前１１時５４分