Filter
Top Products
Before Use
11
You can control TVs by entering the remote control code.
Preparation
≥Turn on the TV.
[1] Refer to the chart below for the code for your
TV.
[2] Press and hold [TV, Í] and enter the 2-digit
code with the numeric buttons.
≥e.g.: “01”: [0] )[1].
≥After entering the code, test the remote control by turning on
the TV and changing channels.
Note
≥If there is more than one code, repeat the procedure until you find
the code that allows correct operation.
≥If your TV brand is not listed or if the codes listed here do not allow
control of your TV, this remote is not compatible with your TV.
Operation: Button
On and off: [TV, Í]
Video input mode: [TV, AV]
Channels: [TV, CH, W, X]
Volume: [TV, VOLUME, i, j]
List of TVs Compatible with the unit’s Remote Control
Manufacture and Code No.
ª Switching to the AV input on your Panasonic TV
≥Press [AV] to switch to the AV input. Each press of [AV] switches between “TV reception” and “AV input(s)”.
If other Panasonic products are placed close together, change the
remote control code on the main unit and the remote control (the two
must match).
≥Use “MODE 1”, the factory set code, under normal circumstances.
Preparation
≥Press [DVD].
[1] While stopped
Press [FUNCTIONS].
[2] Select “SETUP” with [3, 4, 2, 1] and press
[ENTER].
[3] Select “Others” with [3, 4] and press [2, 1].
[4] Select “Remote Control” with [3, 4] and press
[ENTER].
[5] Press [3, 4] to select the code (MODE 1,
MODE 2 or MODE 3) and press [ENTER].
The code on the unit has been set.
[6] While pressing [ENTER], press and hold for
about 2 seconds the numeric button ([1], [2], or
[3]) corresponding to the code you selected in
step 5.
The code on the remote control has been set.
[7] Press [RETURN].
When the following display appears when you use a remote control
with a different code.
If you are trying to use this unit’s remote control, change its code to
match the unit’s (# step 6).
TV operation
Panasonic 01, 02, 03, 04, 44 GOODMANS 05, 06, 31 NOKIA 25, 26, 27 SANYO 21
AIWA 35 GRUNDIG 09 NORDMENDE 10 SBR 06
AKAI 27, 30 HITACHI 22, 23, 31, 40, 41, 42 ORION 37 SCHNEIDER 05, 06, 29, 30, 31
BLAUPUNKT 09 INNO HIT 34 PHILIPS 05, 06 SELECO 06, 25
BRANDT 10, 15 IRRADIO 30 PHONOLA 31, 33 SHARP 18
BUSH 05, 06 ITT 25 PIONEER 38 SIEMENS 09
CURTIS 31 JVC 17, 39 PYE 05, 06 SINUDYNE 05, 06, 33
DESMET 05, 31, 33 LOEWE 07 RADIOLA 05, 06 SONY 08
DUAL 05, 06 METZ 28, 31 SABA 10 TELEFUNKEN 10, 11, 12, 13, 14
ELEMIS 31 MITSUBISHI 06, 19, 20 SALORA 26 THOMSON 10, 15
FERGUSON 10 MIVAR 24 SAMSUNG 31, 32, 43 TOSHIBA 16
GOLDSTAR/LG 31 NEC 36 SANSUI 05, 31, 33
WHITE
WESTINGHOUSE
05, 06
Remote Setting
The unit’s remote control code
75VGN.book 11 ページ ２００４年７月２１日 水曜日 午前１１時５４分