Filter
Top Products
50
[[VHS]]
Before Use
Facing up the surface from which you can see a roll of tape,
Insert a video cassette
≥This unit automatically is turned on.
∫To eject a video cassette
For main unit.
≥Press [<, EJECT] on the main unit.
For remote control.
≥Press [VHS] and then press and hold [∫, STOP] for about 3 or more seconds.
≥Break out the video cassette’s tab to prevent accidental erasure. Cover the hole with a double layer of
adhesive tape when you want to use the video cassette for recording again.
≥You can use video cassettes with the VHS and S-VHS marks, but this unit is unable to make full use of the
characteristics of S-VHS video cassettes.
≥Poor quality or damaged video cassettes can cause the heads to become dirty and malfunction. Store your video cassettes carefully and
discard when they become dirty or damaged.
≥Never use video cassettes on which juice has been split or those that are extremely damaged since this will not only cause the heads to
become dirty, but will also make the unit malfunction.
Cleaning the video heads
Dirt on the video heads can cause poor recording and play.
Use an optional head-cleaning cassette (part number NV-TCL30PT). If the problem persists, seek advice from a qualified service person.
The tuning on DVD is automatically applied to the one on VHS. Therefore, tuning on VHS is not required.
When only the video output on VHS does not look natural, use the Fine Tuning function on VHS as below.
You can finely tune the reception on VHS regardless of the reception
on DVD.
[1] Press [ENTER]
for 5 seconds or
more.
≥Tuning screen
appears.
[2] Press [3, 4, 2, 1] to
select the desired channel
name, and then press
[ENTER].
≥Fine Tuning screen appears.
[3] Press [2, 1] to obtain the best tuning
condition.
≥Press [ENTER] to select “AUTO”.
[4] Press [RETURN] to start the new condition.
≥To continue Fine Tuning:
Repeat steps 2, 3, and 4.
[5] Press [RETURN] to exit the tuning display.
Note
≥When you wish to set the item other than Fine Tuning, set it on
DVD. (l 46)
≥When you set or change the Tuning menu in Setup menu on DVD,
the settings on the Fine Tuning is restored to the default.
Inserting video cassette
Video cassette information
∫ Video cassettes
∫ Video cassette care
∫ Maintenance
Tab
Setting Up
∫ Fine Tuning
Preparation
≥Press [VHS].
Tuning
: access
ENTER
: return
RETURN
: select
Pos Name Pos Name
1 ARD 04 6 -
-
-
- -
2
ZDF
02 7 -
-
-
- -
3
N3
05 8 -
-
-
- -
4
HR3
08 9 -
-
-
- -
5
BR3
10 10 -
-
-
- -
: auto
ENTER
: return
RETURN
: select
Pos : 1
Name : ARD
Channel : 4
Fine tuning : AUTO
Decoder : OFF
Video system : AUTO
Audio mode : BG
Mono : OFF
VHS
75VGN.book 50 ページ ２００４年７月２１日 水曜日 午前１１時５４分