Filter
Top Products
Chapter 2 Operation and Maintenance
60
Figure 2-9 An Example of the Copy Fault Occurrence Screen
Operations after recovering from a copy fault
For information on operation to recover the state of the pair where the copy fault occurred to the
normal state after removing the cause of the copy fault, refer to 3.3.20 “Display Copy Fault List”
in the “Data Replication User’s Manual (Function Guide)”.
(2) Link fault
Detecting a link fault
A link fault occurs due to a cable fault between disk arrays or a fault of Replication Director.
If it occurs during Replication, it may cause a copy fault.
If a link fault occurs, you can use the Replication Screen to check it.