Filter
Top Products
Chapter 2 Operation and Maintenance
42
Step 3. Executing Restore from tape (backup server)
Restore data from the tape to RV, using backup software.
Figure 2-5 Restoring Backup Data to RV
Step 4. Flushing MV file system (business server)
Flush the MV file system and discard data in the file system buffer.
iSMrc_flush -drv D:
Then, the following message appears and flushing is executed.
Flush Start 2001/02/21 12:23:03
disk10 dev001 WN
\\?\Volume{822575dd-63d9-11d5-b1e0-009027520bce}\
D:
Flush Normal End 2001/02/21 12:23:04
disk10 dev001 WN
\\?\Volume{822575dd-63d9-11d5-b1e0-009027520bce}\
D:
Step 5. Unmounting MV (business server)
Unmount MV before executing Restore.
To execute unmounting, you must terminate all applications which access the drive. Also, refer to the
description about unmounting in Chapter 3 “Notes”.
iSMrc_umount -drv D:
Then, the following message appears and unmounting is executed.
Umount Start 2001/02/21 12:23:15
disk10 dev001 WN
\\?\Volume{822575dd-63d9-11d5-b1e0-009027520bce}\
D:
Umount Normal End 2001/02/21 12:23:15
disk10 dev001 WN
\\?\Volume{822575dd-63d9-11d5-b1e0-009027520bce}\
Tape
RV
Backup Software such as
ARCserve, BackUp Exec,
N
etBackup, etc.