Filter
Top Products
Chapter 1 Installation Procedure
6
(2) ReplicationControl Software Installation
To install ReplicationControl, follow the procedure below.
(1) Log on as the Administrator.
(2) Set the ReplicationControl installation media on CD-ROM drive and execute the following install
program in the CD-ROM drive:
\iSMRC\SETUP.EXE
(3) Follow the directions of the installer.
The following software components are installed:
• ReplicationControl
• Storage Manager Volume List
To use the ReplicationControl, build the logical volumes to be operated on the disk array, set a pair
of volumes under replication control, and then create a Volume List. Use the iSMvollist command
to create the Volume List.
To use the ReplicationControl through the previously installed job scheduling software or Windows
task scheduler, the services and systems need to restart for recognizing the path names of the
installed execution files.
To install and use both ReplicationControl and SnapControl on the same server, they must be of the
same version.
(3) ReplicationControl Software Uninstallation
To uninstall ReplicationControl, follow the procedure below.
(1) Log on as the Administrator.
(2) Check whether the Storage Manager Volume List or ReplicationControl command is running and
whether the Volume List Display screen is open.
Terminate any running command and close any screen.
(3) Close [Event Viewer] if it is open.