Filter
Top Products
D-Link ShareCenter Pulse User Manual
Page 97
Your ShareCenter has a USB Copy feature, which allows you to connect a USB storage drive to the front USB port and upon pressing the USB Copy button, the contents of
the USB storage drive will be automatically copied to the ShareCenter.
located behind the front flap on the front of the
ShareCenter. The USB LED will start to flicker and once
the light is lit solid, the USB storage device is ready for
use.
Press and hold the USB Copy button for 1-3 seconds.
The ShareCenter will create a new folder in the Volume
1 folder and will copy all the files from the USB storage
device to this folder.
To unmount the USB storage device after the copy is
complete so you may safely remove the USB storage
device, press and hold the USB Copy button in for 5
seconds. When the USB LED turns off, the USB storage
device has successfully unmounted and is ready to be
removed.
To check if the USB storage device is connected properly,
go to the page in the Web
GUI of the ShareCenter and view thesection.
You should always unmount your USB storage
device before removing it to prevent any data loss.