Filter
Top Products
D-Link ShareCenter Pulse User Manual
Page 15
that RAID 1 can use on the hard drives installed.
Then the user can configure the desired capacity to be
used for the RAID 1 configuration by entering the desired
capacity amount in the block provided.
To utilize the remaining space, (if the two HDDs differ
in capacity), the user can choose to use JBOD for the
remaining space. Tick this option is needed.
Click ‘’ to continue.
In this section a summary of the configuration will be
displayed.
When ready click on the ‘’ button to initiate the
RAID configuration. This process will involve initializing,
formatting and configuration of the RAID chosen.